Herunterladen Diese Seite drucken

MAX LIGHT PARTYBAR 2x PAR & 2x Jellymoon Bedienungsanleitung Seite 4

Werbung

Verfügbare Sprachen
  • DE

Verfügbare Sprachen

  • DEUTSCH, seite 10
DMX-512 CONNECTION
If you are using a standard DMX controller, you can connect the DMX-output of the controller directly to the DMX-input of the
first unit in a DMX-chain. Always connect the output of one unit with the input of the next unit until all units are connected.
If you use a controller with 5 pin DMX connection you will need to use a 5-pin to 3-pin adapter.
At the last fixture, the DMX cable has to be terminated. Solder a 120 Ohm resistor between signal (-) and signal (+)
into a 3-pin XLR connector and plug this into the DMX output of the last fixture in the chain.
REMOTE CONTROL
With the IR remote, you can operate the
To control the fixture you must aim the remote at the front of the fixture and be no more than
30 feet away.
1. On/Off
2. AUTO MIX: With this button you can choose 10 auto programs for the Par and the
Jellymoon.
To select the desired program, press several times on auto mix until
the desired effect.
3. PAR: Only the LED par in the auto program. You can choose between 13 auto
programs.
To select the desired program, press several times on PAR until the
desired effect.
4. LED: Only the Jellymoon in the auto program. You can choose between 7 auto
programs.
To select the desired program, press several times on LED until the
desired effect.
5. Sound Mix: With this button you can choose 10 sound programs for the par and
the jellymoon.
until the desired effect.
6. PAR: Only the LED par in the sound program. You can choose between 10 sound
programs.
To select the desired program, press several times on PAR until the
desired effect.
7. LED: Only the jellymoon in the sound program. You can choose between 7 sound
programs.
To select the desired program, press several times on LED until the
desired effect.
8. DMX mode
9. PAR JUMP
10. GRADUAL
11. FLASH
Colour - / +
Motor -/ +
Sen -/ +
4
Party Bar
easy and you have many functions.
To select the desired program, press several times on Sound mix
: Par jump chase.
: Par fade mode.
: Strobe
: With this button you can change your speed of your effect.
: Jellymoon speed rotation.
: Sensitivity sound.

Werbung

loading

Diese Anleitung auch für:

153.236