Inserting The Batteries - zassenhaus GERA Bedienungsanleitung

Enjoy your new ZASSENHAUS mill GERA. Please read through the
instructions carefully prior to using it for the first time and keep
them for future users.
IMPORTANT INFORMATION
This product is intended for domestic use only. Improper use, application
or insufficient cleaning and care can impair safety and result in danger
for the user. ZASSENHAUS cannot accept any responsibility for injuries
or damage attributed to improper use.
BEFORE THE FIRST US
· Remove all packaging material and dispose of it in an appropriate way.
· Hold the lower part in one hand, gently turn the upper part counter
clockwise up to the marking
the motor block with battery compartment and fill the mill. Place the
motor block back on respecting the electric contacts.
· Put the upper part back over the battery compartment and push until
it is placed completely over the lower part. Then turn clockwise up to
the marking
· The mill is now ready to use. Start grinding by pushing the button on top.
· Allow the mill to grind in interval steps and do not use the mill with
wet hands.

INSERTING THE BATTERIES

· Open the mill as described above.
· Insert 6 batteries (AAA 1,5V) into the battery compartment, respecting
the +/- markings.
Note: ZASSENHAUS recommends the use of alkaline batteries to
prolong the running time and for a brighter light.
FILLING THE MILL
· Open the mill as described above. Remove the battery compartment
with a light pull upwards. Fill the mill with peppercorns, coarse salt,
dried herbs or spices.
Note: Do not fill completely, but leave a small space.
6
.
and pull it upwards. Carefully remove