Werbung
4
Key
combination
In the utility power mode, press "
Select the item to be set in the setting interface. After selecting the required setting, page
down to "save and exit" page. Choose "Yes", press "
In non-setting mode, momentarily press the key twice, and the LCD display content rotates.
GEMBIRD EUROPE B.V.
All brands and logos are registered trademarks of their respective owners
1000VA / 1500VA / 2000VA / 3000VA PURE SINE WAVE
Press the two keys for 3 seconds to start up.
Press the two keys for 3 seconds to shut down.
Press the setting interface for 5 seconds to restore factory settings and exit the setting
Press "
Press the key for 5 seconds to enter the setting interface.
Press the key momentarily in the setting interface to turn the page.
Press the key for 3 seconds to exit the setting interface without saving data.
In setting mode, when it goes to SAVE page, press "
"Yes", press "
In non-setting mode, press the key momentarily to turn the page (page up).
In setting mode, the parameter decreasing iterates.
In non-setting mode, press the key momentarily to turn the page (page down).
In setting mode, the parameter decreasing iterates.
In non-setting mode, press the key for 2 seconds to enter the state of automatic page
up/down and re-press the key for 2 seconds to exit the state of automatic page up/down.
EG-UPS-PS1000-01, EG-UPS-PS1500-01, EG-UPS-PS2000-01,
EG-UPS-PS2000-02, EG-UPS-PS3000-01, EG-UPS-PS3000-02,
EG-UPS-PS3000-01-S, EG-UPS-PS3000-02-S
Function introduction
interface.
" momentarily to enable inverter mute.
" momentarily to enable the battery discharge
testing for 15 seconds.
" momentarily to save the date and
exit the setting mode.
" or "
" to complete the setting and exit the mode.
- 7 -
http://www.gembird.eu
UPS, LCD DISPLAY, USB
" momentarily, choose
Werbung
