Inhaltsverzeichnis
Werbung
Verfügbare Sprachen
Verfügbare Sprachen
Operation
Z-probe Setting
Spindle Switch
7. To use the Z Probe Select PROBE and press the dial to start the Z-Probe sequence.
8. Select SPINDLE and press the dial to start or stop the spindle at the displayed speed.
9. Select the RPM value and turn the dial to set or adjust the spindle rotational speed, press again to exit.
10. Selecting and pressing the Unlock or Reset icons will unlock or reset the router.
11. Move the cursor to the Back icon and press the dial to return to the previous menu.
Spindle Rotational Speed
Back
07
Werbung
Inhaltsverzeichnis
