GB
BEFORE INITIAL USE
Remove all packaging.
Clean the toasting surfaces with a soft damp cloth and then dry them.
Unwind the mains cable completely.
USING THE DEVICE
Connect the appliance to an appropriate socket.
The control lights illuminate and the toasting surfaces heat up.
The appliance must be heated up before grilling. In the meantime prepare your food.
As soon as the appliance has heated up, the control light goes out.
You can now begin grilling .
Open the appliance at the catch.
Close the appliance, making sure that catch is engaged.
Caution: If the foods have too much filling on, it will not be possible to close the appliance. Take
some of the filling off. Never use force to close the appliance.
During toasting the temperature regulating thermostat switches off and on again. The control
light also switches off and on again.
After completion of the grilling process (approx. 2-3 minutes) open the catch and remove the
foods with the help of a flat wooden or plastic spatula. Never use sharp or metal object (e. g.
knives, metal spatulas, etc.) as this will damage the Teflon coating.
If you wish to grill move food, close the appliance again and wait until the toasting surfaces have
reheated sufficiently.
When the control light illuminates again you can repeat the toasting process as described above.
After completion of the grilling process disconnect the mains plug immediately. With the
appliance open allow it to cool down.
Caution:
The grilling surfaces as well as the sides and top of the appliance get very hot. Avoid any contact.
Danger of burning! Only hold by the handle.
The appliance must always be positioned horizontally during use.
If the supply cord is damaged, it must be replaced by the manufacturer or its service agent or a
similarly qualified person in order to avoid a hazard.
Do not immerse the appliance in any liquid.
The temperature of accessible surfaces may be high when the appliance is operating.
WARNING: Charcoal or similar combustible fuels must not be used with this appliance.