CONTENTS PAGE INTRODUCTION GENERAL DESCRIPTION PRINCIPLES OF OPERATION SAFETY AND INSTALLATION Electrical installation SÉCURITÉ ET CONSIGNES D'INSTALLATION SICHERHEITS- UND INSTALLATIONSINFORMATIONEN INFORMACIÓN DE SEGURIDAD E INSTALACIÓN SPECIFICATION OPERATION Sample preparation Starting gelation Accidental tripping during gelation measurement Stopping during gelation measurement MAINTENANCE, SERVICING &...
INTRODUCTION For you own safety and that of others please read and understand all the information in this user manual before using the Gelation Timer. GENERAL DESCRIPTION The Cole-Parmer Gelation Timer is the ideal instrument for accurate measurement and quality control of gelation of resin or adhesive based samples in the laboratory.
PRINCIPLES OF OPERATION As polymerisation proceeds in a liquid polymer a point will be reached at which on average there will be one cross link per molecule and at this point gelation will be observed. The gel formed may be soft but it will have the property of a solid of elastic recovery from deformation.
SAFETY AND INSTALLATION Before discarding the packaging check that all parts are present and correct. If the equipment is not used in the manner described in this manual and with accessories other than those recommended by Antylia Scientific Ltd the protection provided might be impaired.
SÉCURITÉ ET CONSIGNES D'INSTALLATION INTRODUCTION Veuillez lire attentivement toutes les instructions de ce document avant d’utiliser l’appareil. AVERTISSEMENT DANGER DE TEMPERATURES ELEVEES : les opérateurs peuvent subir de graves brûlures et les matériaux combustibles risquent de prendre feu. Antylia Scientific a apporté un soin tout particulier à la conception de ces appareils de façon à assurer une protection maximale des opérateurs, mais il est recommandé...
Connexions 220V-240V 110V-120V Phase marron noir Neutre bleu blanc Terre vert/jaune vert Le fusible à l’intérieur de l’appareil est destiné à assurer la protection de l’appareil et de l’opérateur. Remarque : les appareils dont la plaque indique 230 V peuvent fonctionner sur 220 V, et ceux dont la plaque indique 120 V peuvent fonctionner sur 110 V.
Seite 8
Dans le cas peu probable où votre appareil présente un défaut de fonctionnement auquel il est difficile de remédier, il est alors préférable de contacter votre fournisseur et, le cas échéant, de renvoyer le matériel. Veuillez inclure une description détaillée du problème constaté et retourner l’appareil dans son emballage d’origine.
SICHERHEITS - UND INSTALLATIONSINFORMATIONEN EINLEITUNG Bitte lesen Sie diese Bedienungsanleitung komplett bevor Sie dieses Gerät benutzen. WARNUNG HOHE TEMPERATUREN SIND GEFÄHRLICH: sie können dem Bediener ernsthafte Verletzungen zufügen und brennbare Materialien können sich leicht entzünden. Cole-Parmer hat bei der Konstruktion dieses Gerätes sehr darauf geachtet, daß der Bediener vor Gefahren geschützt ist.
Geräte, die für 230 Volt ausgelegt sind, können auch bei 220 Volt arbeiten, Geräte für 120 Volt auch bei 110 Volt. Das Typenschild befindet sich hinten am Gerät. 3. Stellen Sie das Gerät auf eine ebene Arbeitsfläche bzw. (falls erforderlich) unter einen Laborabzug. Beachten Sie, daß...
INFORMACIÓN DE SEGURIDAD E INSTALACIÓN INTRODUCCIÓN Le rogamos lea cuidadosamente la información contenida en este folleto antes de manipular el aparato. AVISO LAS TEMPERATURAS ELEVADAS SON PELIGROSAS: pueden causarle graves quemaduras y provocar fuego en materiales combustibles. Cole-Parmer ha puesto gran cuidado en el diseño de estos aparatos para proteger al usuario de cualquier peligro;...
Seite 12
Asegúrese de que los equipos marcados 230V en la placa indicadora funcionan a 220V y de que los equipos marcados 120V funcionan a 110V. La placa indicadora está situada en la parte posterior del equipo. 3. Sitúe el aparato en un lugar apropiado tal como una superficie de trabajo plana, o si fuera necesario incluso en una campana con extractor de humos, asegurándose de que las entradas de aire en la parte inferior no queden obstruidas.
SPECIFICATION Maximum time reading GT-5 9999 minutes in 1 minute increments GT-6 999.9 minutes in 0.1 minute increments Amplitude of plunger oscillation 13mm Frequency of plunger oscillation GT-5 1 cycle/minute GT-6 10 cycle/minute Accuracy of gelation times ±2% Overall dimensions, housing H 119mm W 69mm D 94mm Overall length with standard plunger at bottom of stroke...
OPERATION 1. Mount the instrument clamping post onto a suitable retort stand or fixture at the desired height for operation. Ensure that the instrument is clamped firmly. 2. Screw the appropriate paddle to the end of the paddle connector on the sliding contact. 3.
If the paddle switch is closed in the ‘HOLD’ state the timer is not stopped and the paddle continues to reciprocate. This allows you time to place the sample under the paddle and get ready for gelation measurement. To commence gelation measurement once everything is set up, just press ‘Start’ button once and then follow instructions shown above in 1.
MAINTENANCE, SERVICING & REPAIR WARNING: Ensure the unit is disconnected from the mains electricity supply before attempting maintenance or servicing. This range of equipment does not require routine servicing. The only maintenance required is to clean external surfaces with a damp cloth and mild detergent. Spillages or splashes should be cleaned up straightaway after isolating the unit from the mains electricity supply.
ACCESSORIES A range of accessories detailed below is available for use with the Gelation Timer. Product No Description F0985 22mm Stainless steel plunger F0979 19mm Stainless steel plunger F0982 16mm Stainless steel plunger F1794 Pack of 100 disposable plungers F1795 Disposable plunger adaptor F7846 Pack of 240 sample cups...
This product meets the applicable CE Directives that interference will not occur in practise. Where and UKCA Legislation for radio frequency there is a possibility that injury, damage or loss might interference and may be expected not to occur if equipment malfunctions due to radio interfere with, or be affected by, other equipment with similar frequency interference, or for general advise before qualifications.