•
Read the operating instructions carefully and keep them in a safe place.
•
Follow the basic safety precautions to reduce the risk of fires, electric shocks and reduce injuries to
individuals.
•
Never open or modify the unit. This may result in electric shock or burns.
•
The product may only be operated with low voltage.
•
Refer all servicing to qualified service personnel.
•
The system should only be stored and used in a dry environment.
•
Place the unit in a well-ventilated location to prevent damage from overheating.
•
The OPS PC (eventually also the display) must be cleaned from dust on a regular base (e. g. every 3
month). In practice the cleaning interval is related to the hours of operations and your environment
conditions. Please use a soft brush. Do not open the housing.
•
Do not use liquid or aerosol cleaners to clean this unit. Always unplug the power cord from the wall
outlet before cleaning.
•
Make sure that all components and accessories are included before installation.
•
All equipment should be connected before switching on.
2. Montage
- Mounting
2x M3 x 8 mm
3