Bluetooth Mode - Avantree SLP-370 Bedienungsanleitung

User Manual

Bluetooth Mode

STEP 1
Press the button once to enter Bluetooth mode. For rst time
use, the Slumber will enter PAIRING mode automatically. If not, put
your Slumber into PAIRING mode by pressing & holding the
button until the LED ashes blue and red alternately.
STEP 2
Turn on your device's Bluetooth and select "Avantree Slumber" in
the Bluetooth menu.
STEP 3
Keep them close and wait for 5-10 seconds or until they connect.
Once connected, the Slumber's Bluetooth connection indicator will
turn solid blue.
For subsequent use, the Slumber should automatically reconnect to
the last-paired device within a few seconds of being switched to
Bluetooth mode. If not, you can manually activate reconnection by
tapping the button once, or by selecting "Avantree Slumber" in
your device's Bluetooth menu.
NOTE: You'll need to adjust the volume on both the Slumber &
your audio device to reach the lowest volume level.
10
SLUMBER
Avantree Slumber