Yealink MVC860 Kurzanleitung Seite 5

3
Installation
• MCore Pro supports: mount on the wall, mount on the TV, stick to the table.
• MTouch Plus supports: put on a table, paste on a table, fixed on a table, mount on the wall.
• UVC86 supports: put on a flat surface, mount on top of a display, mount on the wall, mount on the ceiling,
mount on the TV mount.
supports: mount on a wall, stick to the table.
• MSpeaker II
supports: put on the table, stick under the table, stick on the side of the table.
• RCH40
supports: mount on the ceiling, mount on the wall.
• RoomSensor
• Install and deploy the accessories in the system according to the environment and actual needs. For how to
install and deploy, please refer to the quick start guide of each product.
4
Connection
Display
(not included)
(2.1 m, 6.89 ft)
Power
(19V/4.74A)
Display
(not included)
(not included)
• Do not connect RCH40 to the Internet, otherwise it will cause network abnormalities.
• When starting up the system for the first time, you need to connect a mouse to complete the initial configuration. We
recommend using the wireless mouse and keyboard kit.
• Not included accessories requirements:
» Display: Resolution of 1080p or higher and with an HDMI port.
» PC: Equipped with HDMI or USB-C (support DP protocol) Port.
» Ethernet cable: CAT5e or higher ethernet cable.
» HDMI: Standard HDMI cable.
UVC86
(1.8 m, 5.91 ft) HDMI
(3.5m, 11.48ft)
Power
(48V/0.7A)
3x HDMI out
MCore Pro
CAT5e Cable
(not included)
(1.8 m, 5.91 ft) HDMI
(1.2 m, 3.94 ft) USB 3.1 (C - C, HDMI)
PC
MSpeaker II
(2.5m, 8.20ft)
USB 2.0 (A - B) Cable
MTouch
CAT5e Cable
(not included)
(7.5 m, 24.60 ft)
CAT5e
(5m, 16.4ft) CAT5e Cable
(5m, 16.4ft) CAT5e Cable
MTouch Plus
(7.5 m, 24.60 ft) CAT5e
RCH40
VCM35
VCM35