1. Rechtliche Hinweise 1.1 Sicherheits und Warnhinweise In diesem Dokument werden Sicherheits- und Warnhinweise verwendet, welche zur persönlichen Sicherheit und vermeidung von Sachschäden befolgt werden müssen. Ein Nichtbeachten führt zu Tod oder schwerer Körperverletzung. Ein Nichtbeachten kann zu Sach- oder Personenschäden führen. Ein Nichtbeachten kann dazu führen, dass das Gerät nicht die erwartete Funktionalität erfüllt oder beschädigt wird.
Eine falsche Entsorgung kann die Umwelt gefährden. 1.9 Rücksendung Alle an Camille Bauer Metrawatt AG gesandten Geräte müssen frei von allen gefährlichen Verunreinigungen sein (Säuren, Laugen, Lösungsmit- teln, usw.). Benutzen Sie die Originalverpackung oder eine geeignete Transportverpackung zur Rücksendung des Geräts.
Table of Contents 1. Legal information ………………………………………………………………………………………………………… 7 1.1 Safety and warning notices ………………………………………………………………………………………………… 7 1.2 Qualified personal ………………………………………………………………………………………………………… 7 1.3 Intended use ……………………………………………………………………………………………………………… 7 1.4 Disclaimer of liability ……………………………………………………………………………………………………… 7 1.5 Feedback ………………………………………………………………………………………………………………… 7 1.6 Repair work and modifications …………………………………………………………………………………………… 7 1.7 Calibration and new adjustment ……………………………………………………………………………………………...
1. Legal information 1.1 Safety and warning notices In this document safety and warning notices are used, which you have to observe to ensure personal safety and to prevent damage to property. If the warning notice is not followed death or severe personal injury will result. If the warning notice is not followed damage to property or severe personal injury may result.
Incorrect disposal can cause environmental risks. 1.9 Return All devices delivered to Camille Bauer Metrawatt AG shall be free of any hazardous contaminants (acids, lyes, solutions, etc.). Use original packaging or suitable transport packaging to return the device.
5. Electrical connections Ensure under all circumstances that the leads are free of potential when connecting them! k-S1 I-S2 Connection marking Measuring circuit K-P1 L-P2 6. Technical specifications SIRAX CT200 SIRAX CT210 SIRAX CT220 SIRAX CT230 SIRAX CT230 Input Primary current I 50 ...
SR no: 1234567890 CT Ratio: 100/5A; 2.5 VA; CL0.5; FS10 Type plate with the example of the SIRAX CT200 I.L.: 0.72/4 kV; 50-60 Hz; E; IEC 61869-2 Camille Bauer Metrawatt AG Aargauerstrasse 7 / CH-5610 Wohlen 8. Zeichenerklärung / Sign explanation Symbol Bedeutung / signigication Geräte dürfen nur fachgerecht entsorgt werden!
Seite 11
SIRAX CT230 SIRAX CT240 PM 1001637 000 01 Bushing-type current transformer SIRAX CT2xx line 11/12...