Werbung
ATTENTION
-
Please read our operating and or assembly instructions of the product. Failure to comply,
changes of the product or use of any other than original parts will result in the warranty or
any liability claims to be invalid.
-
The assembly or connection of electrical cables or water pipes are only authorised by
qualified personnel.
-
Retighten all screws and connecting parts on a regular basis to ensure continuous sturdiness.
-
Adjust all height adjustable feet until all four feet are positioned evenly on the floor and the
unit is stable without any movement.
-
The unit will take washing machines/tumble dryers with the maximum measurements of
62cm width, 86cm height and total depth of 65cm. The available standing space on the metal
plate has a depth of 58,8cm.
-
Small appliances need to be centred and ensure 20 mm space will remain in depth as well as
width.
-
It is imperative to observe the operating and assembly instructions from the appliance
manufacturer.
ATTENTION
-
Only the usage of washing machines and tumble dryers with electrical out of balance sensors
are suitable.
-
Only condensation dryers are suitable.
-
The cabinets and shelving units are to be fixed to the wall.
-
The maximum weight for 1 appliance is not to exceed 120kg including wet laundry.
-
Should moisture damage/swelling due to water spillage occur contrarily the construction
including the metal shelf, the product is no longer suitable and should be discarded.
-
Adhere to the installation and user manual from the appliance manufacturer.
-
Depending on the appliance manufacturer a base fixing kit might be necessary to be installed
for the washing machine and/or tumble dryer.
-
Type 1
70-181-17
Appliance housing
Type 2
70-182-17
Cabinet WSC146
with drawer
BEGA BBK Sp. z o.o. sp. K.
ul. Poznanska 113A
PL 62-052 Komorniki
Type 3
70-183-17
Cabinet WSC162 with drawer
and pull out shelf
Werbung
