LightPro Onyx 30 R1 150D Bedienungsanleitung Seite 8

ATTENTION
FILTERS
GEHÄUSE
3
8
RING
GLAS
2
Take the following steps when removing or replacing the
filter:
1. Never use two filters simultaneously.
2. Ensure that the housing is clean and dry before you turn the
ring in the housing. The ring must be able to be tightened
properly and sufficiently.
3. Put the ring straight on top of to the body. Make sure at the
beginning that the ring is horizontal before turning.
1
The packaged Onyx has the opal (white) filter built-in.
For questions about parts, service, complaints or other issues
you can contact us by sending an email to info@lightpro.info