iCEBOX IB-1817MC-C31 Schnellinstallationsanleitung Seite 9

Quick installation guide IB-1817MC-C31
5. Place the delivered thermal pad
5
directly on the M.2 NVMe SSD.
6. Put the heat sink plate on the thermal
6
pad and align the notch to the fixture.
7. Install the PCB back into the track
7
inside the housing.
Pay attention to the correct alignment!
8. Reattach the front cover with the two
screws A. When mounting the cover,
8
make sure that the write protection
switch is placed in the rectangular
recess.
Note! Change the write-protect setting
before connecting the device to the
computer. *