Operation Instruction; Specifications; Attentions - CombiSteel DKT-4 Gebrauchsanweisung

Operation instruction

1. ON/OFF: Power on, the buzzer makes a sound "Di" one time, means the initialization is finished.
Press ON/OFF, will hear "Di", at this time all the displayers show "8" and last for 3 seconds. This stage is to test
the whether the time segment is working or not. After 3 seconds, "Di" comes with displayers show normal
data. If under power on, press ON/OFF 2 seconds, it will "Di" and power off, then will show no any display and
sound.
2. START/STOP: Press key (1-4, 6 or 8), the corresponding time starts counting down and the middle colon
flickers. Under working status, long-press number key, the corresponding timer stops working, and then the
time figure is back to original figure.
3. TIME: Press TIME key is able to start/stop summary time at any time, and other working timers will not be
influenced. When setting the TIMER, the displayer will show "END". Then press the desired timer group
(1-4, 6 or 8) to set the time, then UP and DOWN key to adjust the time. Repeat this step to set the timer group
one by one, and the time will be automatically saved. After finish setting all desired timers, press TIME key to
finish the summary time setting.
4. REMINDER: The start/stop of shake-basket can be set under any status. Press REMINDER key, "Di" comes,
the vacant displayer will show AL-1 After the desired timer group is set, press REMINDER key to pass and go
on setting another one. Repeat this step to set up other two shake baskets, which will be shown by displayer.
After finish setting, press REMINDER key, "Di" comes two times, to exit the shake-basket setting.
5. shake-basket time go-off indication: (1-4, 6 or 8) is in working status, when reminding time is up, displayer
shows AL-1 (AL-2, AL-3, ...) and flashes with alarm sounding. To turn off this alarm, just press the relevant
button beside the liner. Then the liner display panel will go on counting down.
6. Summary time go-off indication: the liner display shows "end" in a glitter way with an intermittent alarm.
To end this alarm, just press the relevant button beside the liner. Then this working section ends.
7. To Adjust volume: users can change the volume by pressing the button "▲" and "▼".
8. To Switch mode "hour/minute" and mode "minute/second": in the shutdown status, press the button
"TIME" for 3 seconds, a "Di" comes, then it automatically enters into the mode "minute/second", press the
button beside the liner and choose mode "N-S" or mode "H-N", then save the setting and exits.

Specifications

Type
Size (LxWxH)
Voltage
Power
Net Weight
Gross weight
Timer group
Stages of shaking basket
(interval reminder)

Attentions

1. The Timer's case is made of stainless steel, but it's NOT waterproof. To clean it, use wet cloth with oil
degreaser to wipe. Do NOT wash the machine with water.
2. Use fingertip to press the key gently. To avoid bad contact by scratching the displayer and key, do not use
fingernails or other hard objects to touch.
3. The two fixers is designated for mounting purpose. Use expansion bolt to fix them on the wall, then secure
the timer on the fixers. Please ensure mounting is firmed and secured before plug in.
4. Please read the instruction manual carefully before use. To avoid electric shock caused by misconduct of
inner circuit, do not disassemble the machine by yourself.
DKT-4
170x130x36mm
AC220V
2W
750gr
860gr
4
1
www.combisteel.com
DKT-6
240x130x36mm
AC220V
2W
880gr
1020gr
6
1
DKT-8
300x112x36mm
AC220V
3W
1080gr
1130gr
8
3
5