Cloud Nine THE WAND Bedienungsanleitung Seite 6

INSTRUCTION FOR USE
READ ALL INSTRUCTIONS BEFORE USING
1. Plug into the mains and turn on by pressing the power
button down for two seconds.
2. The auto light will turn blue and the MED light will flash red.
The MED light will remain green once the MED temperature
is reached.
3. To select the LOW or HIGH temperatures, press the power
switch again until the selected temperature flashes red. The
indicator will turn green once the selected temperature is
reached. You can now begin styling.
4. When the wand has reached your selected temperature,
begin styling. Before using the wand, ensure your hair is dry.
Using a wand on wet hair can damage the hair cuticle.
5. When the wand is in AUTO mode, it will turn on the hiberna-
tion mode. The intelligent sleep technology within the the
wand will automatically work when it has been switched on
but not used for a period of 30 minutes.To turn on the
AUTO mode, simply press the button for about 2 seconds.
Once in hibernation mode you'll notice that the temperature
panel will occasionally flash a green light to remind you.
However, during this mode the actual wand will cool down.
When you're ready to use your wand again simply press the
power button again.
6. Once you have finished styling, turn the power o
pressing the power button for two seconds until the green
indicator light has gone o
power supply.
7. The wand also has a kick stand integrated into the back of
the handle. To use the stand, lift the stand with the tip of
your finger and extend out towards the barrel. Place on a
flat surface.
Replace the stand into the handle before styling.
and unplug from the mains
by