Schou Grouw 95666 Gebrauchsanweisung Seite 19

INSTALLATION
CAUTION: WHEN USING POWER
TOOLS SUCH AS AN ELECTRIC
DRILL, PLEASE WEAR EYE PROTEC-
TION.
WARNING: ENSURE THERE ARE
NO LIVE ELECTRICAL WIRES OR
PLUMBING IN THE WALL AT THE LO-
CATION YOUR ARE DRILLING.
MOUNT DIRECTLY TO WOOD STUD
RECOMMENDED TOOLS:
• Masking tape
• Stud-finder
• Spirit level
• Electric drill
• Ø3mm drill bit
• Philips head screwdriver
STEPS
B
D
1. Use the stud-finder to locate the stud.
2. Check the hole centers with the level
to ensure they are plumb.
3. Drill 4 holes with a 3mm drill bit in
the template centers.
4. Fasten the mounting bracket to the
wall or timber post with 4 screws and
washers.
95666_Manual_HoseReelForWall_30m_Grouw_e.indd 19 95666_Manual_HoseReelForWall_30m_Grouw_e.indd 19
5. Hang the hose reel on the wall
6. Connect the inlet hose to the reel and
MOUNT TO A HOLLOW OR MASON-
RY WALL - RECOMMENDED TOOLS:
• Masking tape
• Spirit level
• Electric drill
• Ø10mm masonry drill bit
• Philips head screwdriver
STEPS
1
57mm (2 ")
4
165mm (6 ")
1
2
80cm（32＂）
(recommended)
1. Tape the drilling template on the wall
2. Check the hole centers with the level
3. Drill 4 holes with a Ø10mm masonry
4. Tap plastic wall anchors (B.3) into
5. Fasten the mounting bracket with
19
bracket and secure it by inserting the
mounting tube.
the other end to the water source.
hammer or mallet
57mm (2 ")
B
165mm (6 ")
D
80cm（32＂）
(recommended)
B.3
at a convenient height, making sure
the holes are between studs.
to ensure they are plumb.
drill bit in the template centers.
holes with a hammer or mallet.
GB
1
4
1
2
07-10-2022 13:22:54 07-10-2022 13:22:54