Inhaltsverzeichnis
Werbung
Verfügbare Sprachen
Verfügbare Sprachen
ENG
4.4 Brightness Adjustment
1. Press
to access the menu, choose
2. Navigate with
to select the desired brightness
3. Press to exit the menu
4.5 Pairing the Baby Unit (Camera) with the Parent Unit
The Baby Unit is paired to the Parent Unit when supplied. There is no need to pair the units again unless the Baby Unit loses its link with the Parent Unit.
To renew the pairing of your units or pair a new/additional Baby Unit, follow the procedure below If unsuccessful, please repeat the pairing process:
NOTE: Before you begin pairing, make sure to have the Baby and Parent Units side by side and turned on.
1. Press
to access the menu, choose
2. Navigate with
to select the camera you want
to pair and press
3. Press and hold the Pair Button at the back of
the camera until the pairing process is complete
4. Press
to exit the menu
12
and press
and press
Werbung
Inhaltsverzeichnis
