Install Hiboost Booster System; Before You Install; Installation Overview; Booster System Installation Examples - HiBoost Hi17-5S-Plus Betriebsanleitung

Install Hiboost Booster System

Before You Install

 Make sure you have sufficient cable length between the outdoor, indoor antennas and the
booster in case you do not have a standard kit.
 Make sure the place where you install the booster is near to one existing electrical outlet.
It should also be well ventilated, away from excessive heat, moisture, and direct sunlight.
Hi17/20/23-3S/5S/6S installation tools and accessories
Num. Name
1 Plastic expansion bolt
2 Tapping screw
3 Hanging folder
4 Reciprocating drill
5 Shot bit

Installation Overview

Installation is easy to perform in 4 simple steps:
1) Find the strongest received signal for the location of the outdoor antenna.
2) Install the outdoor antenna on the roof to obtain the strongest downlink signal from
the local cellular towers. It should also be as far away as possible from where you
plan to place the indoor antenna (vertical separation is more important than
horizontal separation).
3) Install the indoor antennas where you want to improve the signal level.
4) Mount the booster, connect the cables from the outdoor antenna and indoor antenna
at the designated ports, and connect the booster to the AC supply (make sure all the
cables are connected before applying power).
Specification Quantity
^8
M6*50
^8
９
Remark
5 Standard accessories
4 Standard accessories
1 Standard accessories
1 Provided by engineer
1 Provided by engineer