AudioLink AT14 Gebrauchsanleitung Seite 5

All manuals and user guides at all-guides.com
Kit content AK14: AudioLink Audio Transmitter
1x AT14 AudioLink Transmitter
1x AR14 AudioLink Receiver and charger
2x NiMH AAA 1.2V 800mAh rechargeable batteries
1x Power Supply Adapter 12VDC/100mA
1x 3.5mm stereo jack to RCA Phono audio cable
1x Manual
How does it work?
Plug the AT14 AudioLink Transmitter onto your MP3 player or PC.
Connect the (AR14) AudioLink Receiver to your HiFi system, by
plugging the RCA phono jacks into one of the available audio inputs
of your HiFi system (e.g. AUX). Set the Receiver and Transmitter to
the same channel (1 or 2) by using the slide switch.
Connect the power supply adapter, and turn on the Transmitter and
Receiver, by using the slide switch.
Place the respective antenna upright.
The audio signal will now be transmitted wireless from your iPod to
the Receiver. The Receiver will transmit the signal onto the HiFi
system.
Operate your iPod as you are used to, and listen to the music via
your own HiFi system.
If the battery inside the Transmitter is going flat, you can exchange it
for the full battery which in the meantime has been recharged by the
AR14 Receiver.
5
P/N033000H13840 rev.01-05-06 BMB Home AudioLink