StarTech USB150WN1X1 Kurzanleitung
Quicklinks
USB 802.11N 150Mbps mini Wireless NIC
Product IDs
USB150WN1X1
USB150WN1X1W
Product Diagram
Top View
1
Port/LED/Connector
• Connect the Gigabit Ethernet Adapter to a USB-A
1
USB 2.0 Type-A Port
• Press to initiate the automatic connection to a
2
WPS Button
Package Contents
• USB Wireless Adapter x 1
• Instruction Manual x 1
Requirements
For the latest manuals, product information, technical specifications, and declarations
of conformance, please visit:
www.startech.com/USB150WN1X1
www.startech.com/USB150WN1XW
• USB enabled computer with an available USB port
To view manuals, FAQs, videos, drivers, downloads, technical drawings, and more, visit www.startech.com/support
2
*Product may vary from image
Function
port on the computer
WPS-Enabled Wireless Access Point (AP)
Note: This feature is Windows-only.
Installation
Windows
1. Connect the mini Wireless NIC to a USB-A Port on the Host Computer. The
operating system should auto-install native drivers.
Note: If the drivers do not auto-install, please follow the instructions under Download
the Driver section.
macOS
1. Follow the instructions under Download the Driver section.
Download the Driver
1. Navigate to
www.startech.com/USB150WN1X1
or
www.startech.com/USB150WN1XW
2. Click the Drivers & Downloads tab.
3. Under Driver(s), download the Driver Package corresponding the Operating
System installed on the Host Computer.
Install the Driver
Windows
1. Right-click the zipped Driver Package that was downloaded. Click Extract All.
Browse to the newly created folder.
Note: Ensure to make a note of the location where the drivers were extracted. That
location will be used on the next step.
Windows usually saves the files to the Downloads folder associated with the user
account (e.g. C:\Users\useraccount\Downloads).
2. Open the folder corresponding to the Windows version installed on the Host
Computer.
3. Right-click the Installer Setup file. Click Run as administrator.
Note: If the Run as administrator option is not available, you could be attempting to
run the Installer Setup from within the zipped Driver Package. Extract the files using the
instructions in Step 1 in the Install the Driver section.
4. Follow the on-screen instructions to install the Device Driver. Restart the Host
Computer if prompted.
Quick-Start Guide
Manual Revision: June 28, 2023
Verwandte Anleitungen für StarTech USB150WN1X1
Inhaltszusammenfassung für StarTech USB150WN1X1
- Seite 1 4. Follow the on-screen instructions to install the Device Driver. Restart the Host • USB enabled computer with an available USB port Computer if prompted. To view manuals, FAQs, videos, drivers, downloads, technical drawings, and more, visit www.startech.com/support Manual Revision: June 28, 2023...
- Seite 2 • Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. In no event shall the liability of StarTech.com Ltd. and StarTech.com USA LLP (or their officers, directors, employees or • Consult the dealer or an experienced radio/TV technician for help agents) for any damages (whether direct or indirect, special, punitive, incidental, consequential, or otherwise), loss of This device complies with part 15 of the FCC Rules.
- Seite 3 Disposal of waste batteries and electrical & electronic equipment Les produits StarTech.com ne sont pas soumis aux exigences de la section 2 de l’annexe I de la StarTech.com Produkte unterliegen nicht den Anforderungen in Abschnitt 2 des Anhangs I der directive 2014/30/UE pour les installations fixes.
- Seite 4 De producten van StarTech.com zijn niet onderworpen aan de vereisten in sectie 2 van bijlage I van Richtlijn 2014/30/EU voor vaste installaties. Los productos de StarTech.com no están sujetos a los requisitos de la sección 2 del anexo I de la I prodotti StarTech.com non sono soggetti ai requisiti della sezione 2 dell’allegato I della Directiva 2014/30/UE para instalaciones fijas.