TCi WebWizard Handbuch Seite 25

Adaptive Brightness
Please note that the settings should be made when the device is mounted.
1. Current value shows the current, constantly changing sensor value.
2. Day value; here you set the day value [Set day]. From this value the display is set to the maximum brightness.
3. Night value; Here you set the night value [Set night]. If the sensor value falls below this specification,
the display to the lowest brightness level. Optimally, you should make these entries at night.
4. Use the Max brightness and Min brightness sliders to limit the overall screen brightness.
The screen brightness changes linearly to the prevailing lighting conditions.
Ludwig-Rinn-Straße 10-14 • D- 35452 Heuchelheim/Giessen • Phone: +49 6 41-9 62 84-0 • Fax: +49 6 41-9 62 84-28 • www.tci.de
Page 25 of 38