Werbung
Installation
instruction
Attention!
• installation of item should be carried
out only by qualified professional,
following the instructions of this
guidance;
• assembly is carried out by two per-
sons;
• please, check for presence of all
details after unpacking. Glass panels
must be transported vertically;
• please, lean glass panels vertically
against the wall during assembly of
other parts;
• it is expressly prohibited to wap upon
corners of glass panels
Recommendations
for use
Attention!
It is required to remove protective
film after carrying out of assembly
operations.
Product
maintenance
Attention!
• for correct operation of the system it
is required to install purification filters
at feed pipelines with degree of purifi-
cation of 100-300 micron.
• for the avoidance of damage of the
surface of the product it is not allowed
to use water of temperature more
than 60 degrees C.
• use only mild detergents and soap for
cleaning of the item.
• do not use corrosive washing agents
or abrasive pastes for cleaning of the
item.
• accute contaminations on the surface
is recommended to treat with diluted
vinegar and wash off with the water.
• shallow scratches (for acrylic parts
of the item) can be removed with fine
grid sandpaper (grade 2000)
Instruction is designed for expert.
Assembly and installation must be
carried out only by qualified professional
following the instructions of this
guideline.
Attention!
Assembly is carried out by two persons.
Manufacturer has a right to introduce
change of component parts that has no
effect on appearance and functionality
of product.
All parameters indicated in this
instruction have formal meaning.
Manufacturer reserves the right for
technical changes.
Attention!
After assembly sealant must be given
some time to harden.
It is forbidden to use item within
24 hours after completion of installation.
English
3
Werbung
