cable matters 202076 Bedienungsanleitung Seite 9

10. The Properties dialog box should
open automatically. If it does not,
right-click the newly created device
under Sources and click Properties
11. In the Properties dialog box, select
Digital Audio Interface (Video
Capture Device) from the drop-
down list, and click OK
12. From the OBS main screen, click
the Gear icon next to the newly
created audio device, and select
Advanced Audio Properties
13. In the Advanced Audio Properties dialog, find the Audio Capture Device in the
list. In the Sync Offset (ms) column, enter 470. NOTE: This is a standard
offset sync setting. If you experience audio delays, try adjusting this setting.
14. Click OK to save your changes.
15. From the OBS main screen, click the Settings button from the menu in the
Controls tab at the bottom of the screen.
16. For streaming, select the Stream tab and configure the program for your
desired streaming service. For recording, select the Output tab and configure
your desired Bitrates and Recording Format. Click OK to save your settings.
17. Click the "Start Streaming" or "Start Recording" buttons to stream or record.
www.cablematters.com
7
USB 3.0 HD Video Capture Device