groovy Harry Potter Bedienungsanleitung Seite 3

1. Begin to loosen the screw until roughly half is
protruding, then pull to remove the battery cover
(Fig.1). Insert 3 x 1.5v AA alkaline batteries (not
supplied) into the battery compartment.
Ensure batteries are inserted correctly.
2. Securely screw battery cover back onto base
unit to prevent access to the batteries by a small
child.
3. Slide the ON/OFF button (Fig.1) in the
appropriate direction to turn the light on or off.
4. To change the batteries, follow steps 1-2 with
the exception of removing the used batteries from
the unit and disposing of them safely and securely,
ensuring they are not accessible by small children.
WARNING! This is not a toy.
BATTERY INSTRUCTIONS
Requires 3 X AA, 1.5V batteries (not included)
HOW TO INSERT BATTERIES.
Unscrew the battery cover using a screwdriver. Insert fresh batteries following the polarity marked on
the product. Replace the cover and secure with a screwdriver. Different types of batteries (i.e. Alkaline
and Zinc) or new and used batteries not to be mixed. Only batteries of the same equivalent type as
recommended are to be used. Batteries are to be inserted with the correct polarity. Exhausted batteries
are to be removed from the product. If using rechargeable batteries, charge under adult supervision and
remove before charging. Non rechargeable batteries are not to be recharged. Rechargeable batteries are to
be removed from the product before being charged. The supply terminals are not to be short-circuited. Do
not throw batteries into a fire. Batteries should never be left in the product when not in use for a long period
of time. For indoor use only.
WEEE product should be disposed of by handing it over at a designated collection point. For more
information about where you can drop off your waste product for recycling please contact your local
authority.
EN
OPERATION - BATTERIES
Fig. 1