Werbung
Variant 1 (Art. Nr. 88166):
For two railway circuits
Suitable for N gauge and Z gauge.
Please use the appropriate plug-in power supply unit:
- Z gauge Art.Nr. 88171
- N gauge Art.Nr. 88172
Shipment:
Control board
2x knob railway circuit 1 and 2
2x button ( 1x light, 1x interconnection railway circuit 1 and 2 )
Cover plate
distribution board light
( 4 leds are already connected and the board is
connected to the control board )
The controller has two knobs that can be used to control two independent
railway circuits. Both knobs have a central zero position, i.e. the trains can
go forwards and backwards to be controlled.These independent circuits
can be interconnected via a button. Both circuits can then be controlled via
one knob.
The lighting can be switched on or off using another on/off button.
The controller is ready for installation !
Variant 2 (Art. Nr. 88167):
For one railway circuit
Suitable for N gauge and Z gauge.
Please use the appropriate plug-in power supply unit:
- Z gauge Art.Nr. 88171
- N gauge Art.Nr. 88172
Shipment:
Control board
1x knob railway circuit
1x button ( light )
Cover plate
distribution board light
( 4 leds are already connected and the board is
connected to the control board )
The controller has a knob with which a railway circuit can be controlled.
The knob has a center zero position, i.e. the train can be controlled
forwards and backwards.
The lighting can be switched on or off via a button.
The controller is ready for installation !
Werbung
