Connections - high one HI3219HD-VE Gebrauchsanleitung

Connections

Connector Type
HDMI
Connection
(back&side)
SIDE AV
Side AV
(Audio/Video)
Connection
(side)
SPDIF
SPDIF
(Coaxial Out)
Connection
(side)
HEADPHONE
Headphone
Connection
(side)
USB
Connection
(side)
CI
Connection
(side)
If you want to connect a device to the TV, make sure that both the TV and the device are turned off before making
any connection. After the connection is done, you can turn on the units and use them.
Cables (not supplied)
Side Audio/Video Audio/Video
Connection Cable
English - 30 -
Device
Cable
See the illustrations o n t h e
left side. When using the wall
mounting kit (available from a
third party in the market, if not
supplied), we recommend that
you plug all your cables into the
back of the TV before mounting
on the wall. Insert or remove the
CI module only when the TV is
SWITCHED OFF. If a CI module is
used, it may block the headphone
and Side AV inputs. In this case,
it is recommended to make the
headphone and the Side AV con-
nections before the CI module is
inserted. You should refer to the
module instruction manual for
details of the settings. The/Each
USB input of your TV supports
devices up to 500mA. Connecting
devices that have current value
above 500mA may damage your
TV. When connecting equipment
using a HDMI cable to your TV,
to guarantee sufficient immunity
against parasitic frequency radia-
tion, you have to use a high speed
shielded (high grade) HDMI cable
with ferrites.