Inhaltsverzeichnis
Werbung
Verfügbare Sprachen
Verfügbare Sprachen
Video 75 Plus Studio
3
Operation
3.1 Levelling of the fluid head
The Video 75 Plus Studio has a bubble level. Apply the
vertical brake of the Video 75 Plus Studio and hold the
camera with one hand.
Open the clamping screw of the fluid head and move the
head in such a way, that the bubble moves into the level's
black circle. Tighten the clamping screw firmly.
Touch Buble level
The Video 75 Plus Studio has a self illuminating touch
bubble which allows easy levelling even under unfavoura-
ble lighting conditions.
The illumination is activated by strong tapping on the bub-
ble. The bubble will light up to 45 seconds.
3.2 Removing the V-plate
Push the safety pin of the V-plate lock to the front and
swing it into horizontal position. Pull the V-plate locking
lever out. The V-plate is now released and can be remo-
ved by pulling it backwards.
3.3 Mounting of the camera
Attach the camera V-plate to the tripod adapter plate
(camera accessory) around the camera's centre of gravity.
Á
Turn the counterbalance knob to position 12
Á
Apply horizontal brake and release vertical brake
Á
The springs of the counterbalance engage automati-
cally by tilting the camera through the horizontal posi-
tion (audible clicking).
Á
Lock the head with the tilt safety lock.
- 2 -
Manual
Werbung
Inhaltsverzeichnis
