Herunterladen Diese Seite drucken

Werbung

NL
Bedankt voor de aanschaf van
dit product.
Bij eventuele schade of
problemen, vragen wij u onze
website www.solid.eu/sav te
raadplegen en de procedure te
volgen die op onze website
uitgelegd wordt. Als u niet in de
mogelijkheid bent om via het
web de aanvraag te doen,
vragen wij u te begeven naar de
winkel waar u uw constructie
heeft gekocht, samen met de
beschadigde stukken (of met
een foto) en met de Stuklijst,
terug te vinden in het
montageplan, zodat een eerste
controle door de winkel
uitgevoerd kan worden.Vergeet
ook niet de barcode (beginnend
met ASKAO) mee te nemen of
ze te vermelden op de Stuklijst
op de voorziene plaats. U kan
deze terug vinden op het etiket
op de verpakking van de
constructie ofwel op de
leveringsbon. (zie uitleg
hieronder)
Al deze zaken zijn onontbeerlijk
en dus noodzakelijk voor de
behandeling van uw klacht.
S8214
S8214
F
Nous tenons à vous remercier
pour l'acquisition de ce produit.
En cas de problèmes ou de
dégâts, nous vous invitons à
vous rendre sur le lien internet
suivant www.solid.eu/sav et à
suivre la procédure indiquée sur
la page web. S'il ne vous est pas
possible de vous rendre sur
internet, il vous est demandé de
prendre contact avec le magasin
où vous avez acheté votre
produit, muni des pièces
défectueuses (ou d'une photo)
et la Liste des pièces figurant
dans le plan de montage, afin
qu'un premier contrôle puisse
être effectué par le magasin.
Veuillez transmettre le code
barres (commençant par
ASKAO), ou le mentionner dans
la Liste des pièces à l'endroit
indiqué. Vous le trouverai sur
l'étiquette de l'emballage de
votre produit ou sur le bon de
livraison (voir explication
ci-dessous). Ces données sont
indispensables au traitement de
votre réclamation.
NL
Verpakking
F
Emballage
GB
Packaging
D
Verpackung
ASKAOxxxxxxxxxxx
NL
Leveringsbon
F
Bon de livraison
GB
Delivery note
D
Lieferbeleg
GB
Thank you for acquiring this
product.
In case of problems or damages
please visit our website
www.solid.eu/sav and follow
the instructions. If not possible
to access our webpage by
internet please contact the shop
where the product was bought,
provided with the flawed parts
(or with a picture) and the Bill
of material enclosed in the
assembly plan, so that the shop
can carry out a first control.
Also communicate the following
bar code (beginning with
ASKAO) or mention it in the Bill
of material in the field provided.
You can locate the bar code on
the label fixed on the packaging
or on the delivery order.
(explained below) information is
needed in order to handle your
claim.
S8214
NL
Sticker
F
Autocollant
GB
Sticker
D
Aufkleber
Dienst na verkoop
Service Après Vente
After Salves Service
Kundendienst
D
Vielen Dank für den Kauf dieses
Produkt.
Bitte wenden Sie sich bei
eventuellen Beschädigungen
oder Problemen an unsere
website www.solid.eu/sav und
folgen sie unseren Website.
Wenn Sie nicht in der möglichkeit
die Anforderung über das
internet zu machen, bitte wenden
Sie sich an den Händler, bei dem
Sie Ihr Produkt gekauft haben,
und nehmen Sie die beschädigten
Teile (oder ein Foto davon) sowie
der Materialliste, das Sie im
Montageplan finden, mit, sodass
ihr Händler das Problem
untersuchen kann.
Bitte denken Sie auch an unten
stehenden Barcode (beginnend
mit ASKAO). Nehmen Sie diesen
ebenfalls mit oder geben Sie ihn
an der dafür vorgesehenen Stelle
auf dem Materialliste an.
Sie können diese zurück finden
auf das Etiket von der
Verpackung der Konstruktion
oder auf der Lieferschein (sehe
Erklärung unten) Oben genannte
Informationen und Dokumente
sind für die Bearbeitung Ihrer
Beschwerde notwendig.
S8214
NL
F
GB
D

Werbung

loading

Inhaltszusammenfassung für Solid S8214

  • Seite 1 Problemen an unsere website www.solid.eu/sav te www.solid.eu/sav and follow raadplegen en de procedure te suivant www.solid.eu/sav et à the instructions. If not possible website www.solid.eu/sav und volgen die op onze website suivre la procédure indiquée sur to access our webpage by folgen sie unseren Website.
  • Seite 2 5 cm length die nicht mit dem normalen Verfahren gelöst maximale lengte van 5 cm torsioning and warping, provided this werden konnte, kann Solid eine Person zur verdraaiing (torsie) en kromtrekking does nothing to impede assembly. Baustelle schicken. Sollte sich aus diesem...
  • Seite 3 être nécessaire de Sonneneinwirkung, etc.). Ware bitte nicht in tuinhuis of die, naargelang het model, apart recommended to ensure a solid ground chauffer les galets de coaltar sous les einem geheizten Raum aufbewahren! beschikbaar is in de winkel. In alle gevallen shingles.
  • Seite 4 CreateDate: 11.08.2021 Deze technische tekening, montagehandleiding, afgeleide of detail ervan kan beschermd zijn door intellectuele eigendomsrechten en niets daarvan mag zonder schriftelijke toestemming van Solid NV worden gereproduceerd of gebruikt; anders dan het downloaden, SaveDate: 11.08.2021 het bekijken daarvan op een enkele computer en/of printen van een enkele hardcopy ten behoeve van persoonlijk, niet bedrijfsmatig gebruik.
  • Seite 5 Stuklijst / Liste des pièces / Bill of material / Materialliste S8214 BERGEN S8214 ASKAO__________ Ref. Index # nok WW028x149-TPP-TSG-0-1980 WW028x149-TPP-TSD-0-1980 WW028x149-1IF-TSG-0-0294 WW028x149-1IF-TSD-0-1247 WW028x149-2IF-TS0-0-1980 WW028x149-AV1-TS0-0-2756 WW028x141-AV1-TS0-0-2756 WW028x149-2IF-TS0-0-2380 WW058x090-B1G-TS0-0-2432 WW016x095-PLA-000-0-2320 WW040x120-PT1-000-0-2756 WW040x120-4FA-000-0-0180 WW012x040-4FA-000-0-2320 WW016x088-FEM-000-0-2788 WW016x095-PLA-000-0-2788 WW016x095-MAL-000-0-2788 WW016x088-FEM-000-0-2376 WW016x095-PLA-000-0-2376 WW016x095-MAL-000-0-2376 WW016x072-RAI-000-0-0352 WW016x072-MAL-000-0-0352 WW028x040-4FA-000-0-0260 S508 Roofing 8.8m...
  • Seite 6 Stuklijst / Liste des pièces / Bill of material / Materialliste S8214 BERGEN Ref. Index # nok S8050 1 x S8050 1 x P1R 1 x P1L 1 x P2 1 x S677 1 x ALU 1 x S676 2 x P4...
  • Seite 7 S8214 BERGEN V1 = V2 = V3 = M6 x 40 # 8 M6 # 3.0 x 30 # 8...
  • Seite 8 S8214 BERGEN E = 24 G = 12 P1L = 1 P1R = 1 P2 =...
  • Seite 9 S8214 BERGEN M8 x 50 # 2 M8 # M8 #...
  • Seite 10 S8214 BERGEN A1 = F1 = M6 x 40 # 8 M6 # 3.0 x 70 # 4...
  • Seite 11 S8214 BERGEN S3 = 3.0 x 40 # 1 3.0 x 40 # 1 S6477 3.0 x 30 # 3 3.0 x 40 # 1 S678-R-ASK +/- 985mm...
  • Seite 12 S8214 BERGEN +/- 140mm max. 526mm S1 = 3.0 x 40 # 8 3.0 x 40 # 8...
  • Seite 13 S8214 BERGEN K1 = 5.0 x 90 # 12 +/- 234 +/- 234 1084 1084 +/- 234 +/- 234 1084 1084 M1 = 4 M2 = 2 N3 = 4 3.0 x 30 # 16 x 2 !! N1 = 4 N2 = 4 3.0 x 30 # 16...
  • Seite 14 S8214 BERGEN M5 = 1 3.0 x 30 # 4 M4 = 1 M4 = 1 M3 = 1 3.0 x 30 # 4 3.0 x 30 # 4 3.0 x 30 # 4...
  • Seite 15 S8214 BERGEN J = 32 2.5 x 40 # 192 min. 2 mm !!
  • Seite 16 S8214 BERGEN M5 = 1 3.0 x 30 # 4 M4 = 1 M4 = 1 M3 = 1 3.0 x 30 # 4 3.0 x 30 # 4 3.0 x 30 # 8...
  • Seite 17 S8214 BERGEN 2.5 x 16 # 1000 2780 2.5 x 40 # S6746 Ventilation-kit...
  • Seite 18 S6746 dia Ø50 Buiten / Exterieur / Outside 3.0 x 20 #8 Industriepark 8 8587 Spiere-Helkijn CreateDate: 13.08.2019 SaveDate: 29.10.2019 PlotDate: 29.10.2019...
  • Seite 19 S6746 S6746 S6746 Option 1 Option 2 Option 3 Option 4 Step 1 Step 2...