Building In Dimensions - ETNA T1025ZT Anleitung

Building in dimensions

Saw the opening in the worktop. This should
be done very accurately (see illustrations
below). Also saw out any partitions that may be
present. Ensure that there is sufficient space
allowed at the sides and at the back. Ensure
that there is a clear space with a height of at
least 15 mm below the hob.
480
T1024ZT & T1025ZT
Please note:
The distance between the hob and the rear
wall must be at least 40 mm.
clearance required
* 650 mm for hob without wokburner
750 mm for hob with wokbrander