BOMANN LE 1150 CB Bedienungsanleitung, Garantie Seite 30

• This appliance can be used by children aged from 8 years and above and persons with reduced physi-
cal, sensory or mental capabilities or lack of experience and knowledge if they have been given supervi-
sion or instruction concerning use of the appliance in a safe way and understand the hazards involved.
• Children shall not play with the appliance.
• Cleaning and user maintenance shall not be made by children without supervision.
• This appliance is not designed to be immersed in water during cleaning. Please follow the instructions
that we have included for you in the chapter on "Cleaning".
Overview of the Components
1 Air outlet
2 Handle
3 Control panel with display
4 Air inlet and filter
Button
FULL Without function for this unit
POWER Turning the unit on and off
SETTING Setting the air humidity level
TIMER Activating the timer
SPEED Setting the power of the fan
Supplied parts
1 Unit
1 Water hose, 10 mm
Unpacking the appliance
1. Remove the appliance from its packaging.
2. Remove all the packaging material such as plastic bags, filler
material, cable ties and cardboard packaging.
3. Check that all parts are supplied in the package.
Instructions
CAUTION: Important for initial operation or after trans-
port!
Before initial operation, the unit must stay in an upright position
for at least 3 hours in order for the cooling agent to sink. The
compressor will be damaged otherwise.
• For safety reasons, this unit operates at room temperatures
between 5°C and 35°C only.
• The compressor and fan are automatically turned on and off
by the unit, provided that the humidity in the room is 2% higher
or lower than the set value of the unit.
• When the compressor turns off, the fan might continue opera-
tion for approx. 3 minutes.
30
5 Mains cable
6 Rated breaking point for hose connection
7 Water collection tank
8 Water hose
Control panel
Function
Location
• When installing the unit, make sure to keep a distance of at
least 20 cm between the unit and any walls or other objects.
• The surface must be flat and dry.
Continuous water drain
The water collection tank can collect approx. 1 liter of water. It
must then be emptied.
It is also possible to continuously drain the water into a bigger
container. Please refer to the pictures on page 3 for more infor-
mation.
• Break the rated breaking point (6) out of the housing.
• Connect the water hose included in the delivery scope.
• Place a suitable container next to the unit and then place the
end of the water hose into that container.
Mains connection
1. Make sure the mains voltage you want to use corresponds to
the voltage of the unit. Please check the rating label for de-
tailed specifications.
2. Connect the unit to a properly installed grounded socket. A
signal will sound indicating that the unit is ready for use.
Indicator lamp
Water collection tank full
slowly
fast
Initial operation