Design Features - Rockford Fosgate PUNCH P500X4D Bedienungsanleitung

Design Features

Power/Protect LED
Power LED illuminates red when the unit is turned
on. Protect LED illuminates yellow if a short cir-
cuit or to low of an impedance is detected at the
speaker connections. The amplifier will automati-
cally shut down if this occurs.
4
Punch EQ
A Gyrator based Punch EQ that eliminates fre-
quency shift with boost. This works along with
the crossover switch on the amplifier. When set to
Low-Pass (LP) operation, this control is a narrow
band adjustment variable from 0dB to +18dB @
45Hz.
Speaker Terminals
The heavy duty, nickel-plated set-screw wire con-
nectors (+ and -) will accommodate 8 AWG.
Crossover Switch
Selectable switch for High-Pass (HP),All Pass (AP),
or Low-Pass (LP) operation.
Power/REM Terminals
The power and ground are nickel-plated set-screw
wire connectors and will accommodate 4 AWG.
The remote is nickel-plated set-screw wire con-
nector and will accommodate 8 AWG.(This termi-
nal is used to remotely turn-on and turn-off the
amplifier when +12V DC is applied.)