Button Functions; Connections - Rollei Power Station 320 Anleitung

Button Functions

26
– LCD button: To switch on the LCD display, press the LCD button . The LCD will
automatically turn off after 15 seconds if nothing is connected to the output termi-
nals .
– DC on/off button: To switch on, press the DC on/off button . The DC indicator
lights up and the LCD screen turns on . To switch the unit off, press the DC On/Off
button .
Note: The inputs and outputs of the Type-C connection are not controlled by the
general ON/OFF button .
– AC On/Off button: To switch on, press the AC On/Off button . The AC indicator
lights up and the LCD screen turns on . To switch the unit off, press the AC On/Off
button .
Note: To conserve battery power, turn off the DC, USB and AC outputs when the
unit is not in use . The standard standby time of the AC output is 8 hours . If there is
no charging for 8 hours, the AC power switch switches off automatically .

Connections

Using the 230 V AC output connections:
The Power Station can be used to power your electronic devices, equipment and
appliances at 220 – 240 V and 400 watts . First connect the AC mains plug of your
appliance/equipment/equipment into the AC output of the Power Station and then
press the AC on/off button .
Note: Make sure that the AC power plug is fully inserted into the AC output .
The Power Station provides up to 800 watts of peak power for 5 seconds .
ENGLISH