DMM-618 A
JUMPER SETTINGS
The contact type continuous contact or pulse contact is
set by jumpers. The factory, the contact types are set to
permanent contact. The mode for the start contacts on the
front panel is also set by jumpers. The factory setting is set
to Repeat Mode.
Jumper > Repeat Mode 1-9
> Dauerkontakt 1-9
Technical data
DMM-618 A
Power supply
24 V DC, power supply (optional)
Current consumption
0,55 A
Relay switching capacity
60W (120V/AC max.)
Release
6 Buttons, 18 contacts
Display
2-line LCD-Display, cleartext
Memory media
Compact-Flash Card,
max. 8GB (FAT32 Format)
sampling rate
min. 128 kB/Sec.
AF output
transformer balanced
Alarm output
potential free, changing switch
Connections
Screw-type terminal
Serial output
RS-232, 9600Baud TTL-Level
Matching power supply (optional)
PSU-048/24
Dimensions (WxHxD); Weight
483 x 44 x 173 mm; 1 RU; approx. 2 kg
All manuals and user guides at all-guides.com
DIGITAL MESSAGE MODULE
DMM-618A JUMPER SETTINGS / JUMPER EINSTELLUNG
Jumper > Repeat Mode 10-18
Jumper > Mode Repeat
> Repeat Modus
EINSTELLUNGEN JUMPER
Die Kontaktart Dauerkontakt bzw. Impulskontakt wird mit-
tels Jumper eingestellt. Werkseitig sind die Kontaktarten auf
Dauerkontakt eingestellt. Der Modus der Startkontakte an
der Frontseite wird auch mittels Jumper eingestellt. Werksei-
tig ist der Mode auf Repeat eingestellt.
> Dauerkontakt 10-18
Technische Daten
Spannungsversorgung
Stromaufnahme
Relais Schaltleistung
Auslösung
Anzeige
Datenträger
Abtastrate
NF-Ausgang
Störmeldeausgang
Anschlüsse
Serieller Ausgang
Passendes Netzteil (optional)
Maße (BxHxT); Gewicht
DMM-618 A
24 V DC, Netzteil (optional)
0,55 A
60W (120V/AC max.)
6 Tasten, 18 Kontakte
LCD-Display, zweizeilig, Klartext
Compact-Flash Card,
max. 8GB (FAT32 Formatiert)
min. 128 kB/Sec.
trafosymmetrisch
potentialfrei, Wechslerkontakt
Phönix-Klemme
RS-232, 9600Baud TTL-Pegel
PSU-048/24
483 x 44 x 173 mm; 1 HE; ca. 2 kg
11