Inhaltsverzeichnis
Werbung
English
Safety
instructions
• For safe and proper functioning of
the item as well as for avoidance of
damage of Furniture and getting injury
and maiming, we strongly recommend
to follow all points of the instructions
during installation.
• Follow installation instructions step-by-
step for exclusion on inaccuracy and
errors as well as possible breakages
of Furniture. Use services of Qualified
Specialists.
• Make sure that there are no cur rent-
carrying and water supply parts at the
spot of drilling of wall.
• Before installation it is required to
ensure that the item has no defects
occurred while transporting andall com-
ponent parts are available.
• Claims for defects caused while
transportating, damaged surfaces and
absence of component parts are not
accepted after installation;
• It is required to follow installation require-
ments specified in the instructions;
• Installation tools are not included into
component kit;
We recommend to use sealants for
purposes of hygiene and non-ingress
of moisture under ceramics. Auxiliary
materials (silicone, sealants, etc.) are
purchased separately.
Installation
instructions
Carry out installation with the help of
Qualified Specialists. For installation you
will need: pen, tape ruler, level board,
screw driver+, crescent wrench SW 13, 17,
19 mm, drill, concrete bits 10 mm, silicone
sealant.
2
In order to avoid premature failure of the
valves is necessary to use a mechanical
filter water treatment (not included).
Product
maintenance
• Please, use soft cloth or sponge, soap
solution and water for easy cleaning.
Wipe surface with dry cloth after clean-
ing.
• Please, use reduced impact detergents
for deep cleaning, following the direc-
tions of shop instruction.
• Please, do not use sponges with abra-
sive surface and solvents that damage
surface.
• Please, don't use acid or alkaline liquid
detergent to clean the product.
• Damages resulted from incorrect
mainte nance are not warranty event.
• System should be stored in the original
package in a dry enclosed place mini-
mum 0,5 m away from heat.
The installation should be carried out by
a qualified professional.
Producer has a right to introduce change
of component parts that has no effect on
appearance and functionality of product.
All parameters indicated in this instruction
have formal meaning. Producer reserves
the right for technical changes.
Werbung
Inhaltsverzeichnis
