Inhaltsverzeichnis
Werbung
Verfügbare Sprachen
Verfügbare Sprachen
Charging the storage battery
The storage battery of the band can be charged via the USB port:
1. Take the cap off of the USB plug.
2. Insert the USB plug in a corresponding USB port on your computer.
3. The storage battery will be automatically recharged as soon as the USB plug is
connected.
4. Hold down button 1 (6) on the fi tness band to check the charge status of the storage
battery. The charge status in per cent will be shown on the display.
Fitness band: Functions and settings
Viewing the time/date:
1. Push button 1 (6) on the fi tness band once. The current time will appear on the LED
display.
2. Wait until the current date appears on the display.
3. The display will automatically go dark after a few seconds.
Setting the time/date
You can set the date and time manually or using the software.
1. Push button 1 (6) on the fi tness band once. The current time setting will appear on
the LED display.
2. Push and hold button 1 (6) and button 2 (7) until the minutes are hidden and only the
hours are shown on the display.
3. Use buttons 1 and 2 to set the hours.
4. Hold buttons 1 and 2 down again until the hours are hidden and the minutes appear.
5. Use buttons 1 and 2 to set the minutes.
6. Then hold down buttons 1 and 2 again until the hours and minutes are hidden and
the day appears in date mode.
7. Use buttons 1 and 2 to set the month for the date display.
8. Then hold down buttons 1 and 2 again until the month is hidden in date mode and
the day appears.
9. Use buttons 1 and 2 to set the day for the date display.
10. The display will automatically go dark after a few seconds.
Step counter/timer
1. Hold button 2 (7) down to switch to the step counter menu. The number of steps
covered will appear on the display.
2. Push button 1 (6) once to stop the step counter and push it again to resume the step
counter.
•
Options in the step counter menu:
All manuals and user guides at all-guides.com
18
Werbung
Inhaltsverzeichnis
