Technical Data - fontastic Boncy Bedienungsanleitung

GB
• Do not use chemicals or detergents to clean the product.
• Do not attempt to disassemble the device.

Technical data:

• BT version 5.3
• Profiles: Headset, Handsfree, A2DP, AVRCP
• Range: up to 10 m
• Driver: 11.2 mm
• Frequency: 20Hz-20KHz
• Sensitivity: 84±3dB
• Impedance: 8Ω
• Maximum power: 500mW
• Status LED
• IPX5 splash water protection
• Voice announcement: German/English
• Housing material: ABS
• Battery: 180 mAh Li-polymer
• Charging port: USB Type-C
• Operating time: Up to 8 hrs (at 50% volume)
• Charging time: Approx. 2 hrs.
• Dimension: 130 x 110 x 46mm
• Weight: 40g
The company is not responsible for any damage due
to improper operation.
If you need technical support, please contact our
support team by e-mail at service@fontastic.eu.
We hereby declare, that this device carries the
CE mark in accordance with the regulations and
standards. It conforms with the fundamental requirements of the
(RED) 2014/53/EU directive.
The full text of the EU Declaration of Conformity is available at
the following Internet address:
9
www.d-parts.de/Konfo
Note on environmental protection:
After the implementation of the European
Directive 2012/19/EU in the national legal
system, the following applies: Electrical and
electronic devices may not be disposed of with domestic
waste. Consumers are obliged by law to return electrical and
electronic devices at the end of their service lives to the public
collecting points set up for this purpose or point of sale. Details
of this are defined by the national law of the respective country.
This symbol on the product, the instruction manual or the
package indicates that a product is subject to these regulations.
By recycling, re-using the materials or other forms of utilising old
devices, you are making an important
contribution to protecting our environment.
GB
10