Add Device - Aiwa ACD18-KBTU Bedienungsanleitung

ADD DEVICE

There are 3 methods to add the device.
1-CF MODE
1.
Power on the indoor unit, no need to launch the
air conditioner.
2.
Click "+" in the upper right corner of the "Home"
screen or tap "Add device" on the room which has
no device.
3.
Tap the "Air conditioner(BT+Wi-Fi)" logo.
4.
Follow the comments on the next screen to reset
the Wi-Fi module then check "Confirm the device
is reset" and tap"Next".
5.
Input the password of the Wi-Fi which the same
as your smartphone connected, then tap "Next".
6.
You can see the percent rate of connecting
process, at the same time
"PP", "SA", "AP" shining in turn on the indoor
display.
"PP" means "Searching the router"
"SA" means "connected to the router"
"AP" means "connected to the server"
Enter
password
Rename the
device
Select the
location
room
Acd18-kbtu/ Acd24-kbtu 11
EN