Temperature Setting - Tesla TSL-BT-IHS Bedienungsanleitung

INSTRUCTIONS FOR USE
IMPORTANT-
During the first few minutes of initial use, you may notice smoke and a slight odor. This is
normal and is not a cause for concern.
To help you get the most of this appliance, please follow this operating guide.
1. USE ON DRY HAIR ONLY.
2. Remove plastic cap off end of plug.
3. Plug unit into wall outlet.
4. To turn on, hold the power button in for about 3 seconds.
5. Separate 5 cm strand of hair and place it between plates.
6. Maintaining some tension, slowly slide the iron down the section of hair from roots to ends. Be careful to
avoid touching your hands and scalp with the hot plates.
7. Allow hair to cool before combing or brushing.
8. Repeat as necessary.
9. Once styling is completed, unplug the iron and allow it to cool before storing away.
NOTE: 60 minutes Auto Shut Off is installed for safety. To restart, please repeat Step 4.

TEMPERATURE SETTING

This appliance has 10 temperature settings ranging from 140°C to 230°C to provide styling versatilities for
different hair types. You can vary the temperature according to your particular needs. Use temperature
button to choose desired temperature. It's best to start with a lower temperature until you are confident
using the appliance.
OUR RECOMMENDATIONS:
140°C - 150°C for very thin hair;
160°C - 170°C for fine hair;
180°C - 190°C for normal hair;
200°C -210°C for very thick or coarse hair
220°C - 230°C for professional use.
4