How Does It Work; How To Use And Starting Up For - sparklike HANDHELD 3.0 Bedienungsanleitung

2. HOW DOES IT WORK

A high voltage spark (1) is ignited
inside the IG unit (A). This high
voltage spark causes the argon atom
to emit light to a spectrometer (2).
A microprocessor (3) interprets the
information of the spectrometer and
calculates the argon concentration
on the display (4).
3. HOW TO USE AND STARTING UP
FOR THE FIRST TIME
1. Open the battery hatch
2.
Insert the battery
3. Connect it to the battery socket
4.
Turn on the device from the
ON/OFF switch
5.
Register your device to activate
the device at
sparklike.com/register
to receive an activation code to
your e-mail
6.
Input the activation code
7. Device settings will show on the
screen
8.
The device is ready for use
NOTE: Read all the warnings before the
device is taken into use.
4
2.
3.
1.
5.
7.
A
1.
4.
3.
2.
6.
8.
4.