Inhaltsverzeichnis
Werbung
Hebestellen
Position des Schwerpunkts
General
Maschinenmodell
S1530E
Lifting by Forklift
S1930E
Do not lift the machine from the side. Lifting the machine from the side may cause machine damage.
S2032E
S2632E
1. Make the machine safe with the platform lowered.
S2046E
2. Check the extension platform, controller and chassis parts are correctly secured.
S2646E
3. Remove any loose items from the machine.
S3246E
4. Keep the machine in the lowered position while lifting with the forklift.
S4046E
S4550E
5. Use the forklift slots at the ladder side at the end of the machine.
5.1. Align the forks with the forklift slots at the end of the machine.
Heben mit dem Gabelstapler
5.2. Drive the forklift forwards until the forks carriage almost touches the ladder
Die Maschine nicht von der Seite heben. Heben von der Seite kann zu Schäden führen.
5.3. When lifting the machine rotate the forks back slightly to ensure the machine will not slide off the forks.
Travel with the machine at the specified distance from the ground.
Gabelstapleraufnahmen befinden sich auf der Leiterseite der Maschine.
Length/Dimension/Distance: 0.4m
5.4. Level the forks before landing the machine.
Abb. 3
A Forklift slots
Lifting by Hoist
SIEHE BEDIENUNGSANLEITUNG UNTER TRANSPORT DER MASCHINE
1. Make the machine safe with the platform lowered.
2. Check the extension platform, controller and chassis parts are correctly secured.
8
Alle Einzelheiten finden Sie im Bedienerhandbuch.
3. Remove any loose items from the machine.
4. Use the correct length of hoisting rope to prevent damage to the platform base and guardrail.
Lifting the Machine
X-Achse
620 mm
604 mm
955 mm
956 mm
801 mm
806 mm
808 mm
815 mm
1.058 mm
Operation
Lifting the Machine
Y-Achse
511 mm
540 mm
625 mm
672 mm
530 mm
570 mm
638 mm
676 mm
754 mm
Werbung
Inhaltsverzeichnis
