Herunterladen Inhalt Inhalt Diese Seite drucken

Controls; Appliance Controls; Adjust Temperature Inside The Appliance; Additional Information On The Temperature - Amica FK2525.4UNTX Gebrauchsanweisung

Inhaltsverzeichnis

Werbung

Verfügbare Sprachen

Verfügbare Sprachen

CONTROLS

Appliance controls

The control panel is shown in figure 10. For reference it is also shown
below:

Adjust temperature inside the appliance

The control panel is located inside the appliance on the top wall of the re-
frigerator compartment. It allows you to select the temperature setting
according to the following sequence: 2 -> 4 -> 5* -> 6 -> 8 or activate
rapid cooling function (Fast Cool). You can change settings by consecu-
tive pressing the SET button.
Setting 8 The highest temperature inside the appliance
Settings 4 / 5* / 6 Medium temperature inside the appliance
Setting 2 The lowest temperature inside the appliance
The Fast Cool function - enables rapid cooling of food products so they
stay fresh longer. The function will be automatically disabled after 3 hours
or when the temperature inside the refrigerator compartment reaches
2
C. The function may be disabled sooner by selecting the desired tem-
o
perature with the SET button.
Refrigerator door opening alarm: When the refrigerator is open over 3
minutes, the buzzer will buzz. Close the door or press any button to stop
the alarm, but for the latter, the alarm will go off again after 3 minutes.

Additional information on the temperature

The temperature inside the appliance is influenced by many factors.
How you set the temperature control dial depends on the ambient
temperature, sun exposure, how often you open the door and the
amount of food stored. The middle setting of the dial is most optimal
in most cases.
Do not put food into the fridge freezer before it has reached its oper-
ating temperature, which takes minimum 4 hours.
Do not change the temperature settings due to the change in the
season of the year. The ambient temperature increase will be detect-
ed by the sensor and the compressor will be switched on automati-
cally for a longer period of time in order to maintain the temperature
set inside the chambers.
The slight changes in temperature are perfectly normal and may oc-
cur, for instance during the storage of great quantities of fresh prod-
* According to the model
(warmer)
(cooler)
- 36 -

Werbung

Inhaltsverzeichnis
loading

Diese Anleitung auch für:

Fk252.4untFk2425.4untxFk2425.4unt

Inhaltsverzeichnis