Herunterladen Inhalt Inhalt Diese Seite drucken

Batronix Pro Tsop48-Dip40-Ucp Adapter; Supported Chips / Unterstützte Chips - Batronix PRO PLCC20-DIP20 Handbuch

Inhaltsverzeichnis

Werbung

BATRONIX PRO TSOP48-DIP40-UCP ADAPTER:

-
TSOP48-DIP40-UCP Adapter
-
Professional production adapter
-
Conversion / Umsetzung: special conversion
-
Available online at www.Batronix.com
This adapter was designed specially for the BX40
and USB Chip programmer and can only be used
with these devices.
When placing the adapter into your programming
device, please take care to ascertain that pin 1 of
the adapters (see the labeling on the adapter) is
placed on chip pin 1 of your programming device.
Place the chip in the adapter in such a manner that
the white marking on the adapter coincides with
the
marking
SUPPORTED CHIPS / UNTERSTÜTZTE CHIPS:
This list only shows the commonly used chips so it
does not need to be complete. Your programmer
must support the chip also. If your chip is not
shown on any of the lists or you are not certain,
please contact our technical support team at
Service@Batronix.com.
28F200B5B
28F200B5T
28F200BRB
28F200BRT
28F200BVB
28F200BVT
28F200BXB
Batronix Adapter Manual – © 1998 - 2015 by Batronix Elektronik, www.Batronix.com
55
This document is protected by German and international copyright laws. The incomplete or partial use, sale or reproduction, publishing –
on
the
chip.
28F200BXT
28F320B3B
28F320B3T
28F320C3B
28F320C3T
28F400B3B
28F400B3T
including excerpts – of any kind requires the written permission of the author.
Batronix – Adapter Manual / Adapter Handbuch
Dieser Adapter wurde speziell auf die BX 40 und
USB Chip Programmer ausgelegt und er kann nur
auf diesen Geräten verwendet werden.
Achten Sie beim Einsetzen des Adapters in Ihr
Programmiergerät bitte darauf, dass Sie den Pin 1
des Adapters (siehe Adapteraufschrift) auf den Chip
Pin 1 Ihres Programmiergerätes stecken, so wie
auch eine DIP Variante des Chips eingesetzt werden
würde. Setzen Sie den Chip so in den Adapter, dass
die weiße Markierung im Adapter mit der
Markierung
auf
dem
Diese Liste gibt nur die gängigen Chips wieder, sie
muss also nicht vollständig sein. Ihr
Programmiergerät muss den Chip auch
unterstützen. Wenn Ihr Chip in keiner der Listen
vorkommt oder Sie sich nicht sicher sind, fragen Sie
bitte unseren technischen Support unter
Service@Batronix.com.
28F400B5B
28F400B5T
28F400BRB
28F400BRT
28F800B3B
28F800B3T
28F800B5B
Chip
übereinstimmt.
28F800B5T
28F800C3B
28F800C3T
A29400T
A29400U
A29800T
A29800U
55

Werbung

Inhaltsverzeichnis
loading

Inhaltsverzeichnis