Manual Setting Of All Route Points - Navitel E777 TRUCK Bedienungsanleitung

60 | USER MANUAL — QUICK START GUIDE

Manual setting of all route points

To plan a route, where the starting and the destination points are determined manually, first mark a point on the map where you
plan to start and press «Cursor» [1] to proceed to the «My route» screen. Tap on the information panel at the bottom of the screen
[2]. Press «Set start» in the «Properties» screen [3]. The GPS-receiver must be switched off. The point will be marked on the map
EN as a starting point. Select a destination point on the map: tap on the map to mark the point, press «Cursor» [4] and then press
«Go!» in the «My route» screen [5]. The program will offer 3 alternative routes [6]. Select the appropriate and press «Go!».
Fig. 1
Fig. 4
Fig. 2
Fig. 5
Fig. 3
Fig. 6