Seecode 235585 Bedienungsanleitung Seite 12

Storing the bits
All bits are stored firmly in the magnetic inner slipcase.
After using a bit, it is best to put it back in the corresponding bit
compartment to avoid confusion later.
Storage of the electric screwdriver
The electric screwdriver is locked in the inner
slipcase and removed according to the indica-
tion at the bottom (arrow pointing upwards).
After use, it is best to store the tool directly
there again.
Using the screwdriver set
1.
4.
1. take the desired bit out of the inner slipcase and insert it into
the rotation axis of the screwdriver.
2. Press (3) to screw in the screws.
3. Press (4) to unscrew the screws.
4. Press (5) to switch on the light. Press again to turn the light off.
5. There is a Type-C USB charging port at the end of the screw-
driver (7).
12
2.
5
3.
3
5.
4