Design And Function; Device Components - Vigor V4324 Betriebsanleitung

• Ensure that during measurement you do not touch the measuring points being measured.
• The device must be protected from moisture, splash water and the effects of heat.
• Do not use the device in explosive atmosphere.
• This product is not a toy! Keep the device away from children.
1. Device components/included in delivery
This multimeter has been designed according to EN61010-1-2010 and EN61010-2-033
concerning electronic measuring instruments with an overvoltage category (CATIII) and
pollution 2.
The device is a battery-operated portable 3½-digit digital multimeter for measuring DC and
AC voltage, DC current and resistance and also for diode continuity testing.
1
7
6
5
2 For Your Safety

3 Design and Function

1. Display:
3½-digit, 7 segments, 15 mm high, LCD.
2
2. Back light:
When this button is pushed, the back light
3. Rotary switch:
This switch is used to select functions and
4. „V.Ω. mA" jack:
3 Plug-in connector (positive) test lead for
5. „COM" jack:
Plug-in connector for black (negative) test
6. „10A" jack:
Plug-in connector for red test lead for 10A
7. HOLD button:
When this button is pushed, the most recent
4
of display is switched on. After about 5
seconds, the back light switches off auto-
matically. Push this button again once to
switch the backlight on again.
desired measuring ranges as well as to
turn on/off the meter.
voltage, resistance and current (except
10 A) measurements.
lead.
measurement.
reading remains displayed and the "H"
symbol will appear on the LCD until it is
pushed again.
13