Mi Wi-Fi Range Extender Pro Benutzerhandbuch Seite 6

What should I do if my internet speed drops after connecting the Mi
Wi-Fi Range Extender Pro?
If the internet speed slows down after you connect the signal booster, there may be
interference on the network. Open the Mi Wi-Fi or Mi Home app and check the status of the
booster. If the app indicates a weak signal, move the booster closer to the router and try
again.
What should I do if my Wi-Fi Range Extender Pro stops working?
Open the Mi Wi-Fi or Mi Home app and check the status of the amplifier, then follow the
steps below:
1. If the signal is weak, move the amplifier to another location where there are no major
obstacles between the amplifier and the router.
2. If the signal booster is off-line, make sure the router is transmitting a Wi-Fi signal. If the
router works normally, restart the booster and try again.
3. Make sure that the amplifier has not been blacklisted by the router.
4. If the problem persists, hold down the reset button for at least seconds until the indicator
stays yellow. Reconfigure the amplifier and try again.
How do I set up the amplifier if I want to connect it to a new Wi-Fi
network?
Reset the amplifier to factory settings and reconfigure it.
6