Startup
Clean the cabinet before use. See section on maintenance.
Important note:
If the cabinet has been lying down during transport, wait 2 hours before starting.
Max. capacity line
The cabinet has a line marked inside which indicates the maximum level to which it can be filled.
See fig. 1.2.
Thermostat
The thermostat is located in the compressor compartment. To access, remove the ventilation grille.
See fig. 1.4.
Thermostat factory setting: approx. -20 ºC.
The thermostat can be set between -14 ºC to -24 ºC. Turn clockwise to lower temperature.
Fig. 1.2
Fig. 1.4
8