Safety And Warning Notes - Wisi Proswitch Betriebsanleitung

Safety and warning notes

Please read these user instructions before use the plug-in.
This switch mode plug-in changes mains alternating current to touch-safe low voltage and
may be used only under the technical data listed below.
The switch mode plug-in is only designed for indoor use and should not come into contact
with water or dust. To prevent overheating the power supply should not be covered when it
is in use. Vibrations and special environmental factors on the device are inadmissible.
The main socket should be easily accessible. In the event of operational error, the plug must
be immediately removed from the socket.
The power supply is started up when the plug is inserted in the socket. To turn off the
power supply, the plug must be removed from the socket. Never pull at the cable.
The power supply contains dangerous voltages and the cover should not be removed.
All service or maintenance work should be carried out by qualified personnel who can get
assistance by contacting the manufacturer's agent. With visible damages to the device do
not use this anymore.
An internal fuse protects the power supply against short circuiting in the primary circuit.
In the event that the fuse needs to be replaced, the same type with the same breaking
characteristic and size of fuse should always be used.
The power supply is double-insulated (insulation class II) and needs no earth connector.
The power supply is provided with a DC cable and exclusively for powering of multi switches
from the WISI Communications Company. One end of the DC cable is compressed with a
special F-connector for screwing. By a good assembly at the multi switch it prevents an
unintended interruption of the DC power. The DC connector is to be connected in the input
DC port of the multi switch according to the instructions of the manual of the multi switch.
Therefore the plug-in with the multi switch forms a unit.
This switch mode plug-in has a plastic casing and shouldn't contact with oils, grease etc., as
most types of plastic can be broken down by chemicals and solvents.
The Plug-in power supply designated for the permanent operation in satellite reception
systems. For the use with WISI Proswitch multiswitches DY xxxx
PLEASE KEEP THIS INSTRUCTIONS IN A SECURE PLACE!
3
wisigroup.com