Inhaltszusammenfassung für Feig Electronic TST FSBM-B
Seite 1
Abb./Fig. 1: TST FSBM-B Mobileinheit mit externer Antenne/TST FSBM- Anschluss für Batterie/Battery connection/Connexion pour batterie BMobile unit with external antenna/TST FSBM-B partie mobile avec antenne externe Abb./Fig. 4 : Position der Batterie/Position of the battery/Position de la batterie Die Funkadresse/Radio address/Adresse radio Abb./Fig.
Mono Typ-D-Lithiumbatterie 3,6 V*, FEIG ELECTRONIC GmbH verwenden! typische Lebensdauer: 2 Jahre beim Die mobile Einheit TST FSBM-B ist eine Komponente für WiCAB Funk- • Lesen Sie die Montageanleitung der jeweils zugehörigen Steuerung und Einsatz von XENO XL-205F 19Ah bei Sicherheitssysteme.
1. Gehäusedeckel schließen und die 4 Schrauben festziehen. 24 – 16 AWG 2,2 Lb-in 2. Das Mobilteil TST FSBM-B mit dem Antennenzeichen in Richtung der Class 2 (0,2 – 1,3 mm (0,25 Nm) stationären Antenne TST FSAS zeigend montieren.
• Read the installation manual of the used controller and be sure to observe the The mobile unit TST FSBM-B is a component for WiCAB radio security systems. life span: 2 years when using XENO XL- safety instructions for the controller.
NEC wiring torque 1. Close the housing cover and tighten the 4 screws. 2. Mount the mobile unit TST FSBM-B with the antenna signal pointing in the 24 - 16 AWG 2.2 Lb-in direction of the stationary antenna TST FSAS.
Batterie Batterie au lithium mono type D 3,6 V*, durée L’unité mobile TST FSBM-B est une composante des systèmes de sécurité radio fois et tenez impérativement compte des consignes de sécurité de la de vie typique: 2 ans en cas d’utilisation de commande.
Couple de serrage 1. Fermer le couvercle du boîtier et serrer les 4 vis à fond. 2. Monter la pièce mobile TST FSBM-B avec le symbole d’antenne orienté dans le sens de l’antenne stationnaire TST FSAS. 24 - 16 AWG...