Technical Data - Westfalia 96 76 81 Originalanleitung

Instructions for use
1. Make sure that the mains voltage corresponds to the operating voltage
specified on the rating plate.
2. Make sure the soldering tip is in a firm position and the screws are tightened.
3. Connect the soldering iron to the mains and place it on the original stand
supplied.
4. Turn on the soldering iron by setting the switch to the "I" position.
5. Wait for the soldering iron to heat up to its working temperature.
6. The surfaces of the connection points must be clean. Use an appropriate flux.
7. "Tin" the tip by coating the heated tip with solder.
8. Heat the connection points, not the solder.
9. Apply enough solder to the heated parts.
10. Allow the solder joint to cool down undisturbed.
11. Turn off the soldering iron by setting the switch to the "0" position.
12. Unplug the soldering iron and let the iron cool down on the stand.
Cleaning
▪
Clean the soldering iron with a slightly damp cloth. If necessary, use some
washing-up liquid as well. Do not immerse the soldering iron in liquids.
▪
Do not use harsh chemicals or abrasives to avoid damaging the surfaces.

Technical data

Model:
Article-No.:
Connection voltage:
Rated output:
Soldering tip Ø:
Tip temperature max.:
Weight:
Dimensions (L x W x H):
INSTRUCTION
KB – 100 KB - 200
967681 781221
230 V~ 50 Hz 230 V~ 50 Hz
100 watts 200 watts
9,5 mm, copper, 19 mm, copper,
curved curved
approx. approx.
450 ℃ ± 30 ℃ 480 ℃ ± 30 ℃
0,40 kg 0,76 kg
345 x 41 x 50 mm 380 x 42 x 57 mm
8
KB – 300
781229
230 V~ 50 Hz
300 watts
19 mm, copper,
curved
approx.
520 ℃ ± 30 ℃
0,76 kg
380 x 42 x 57 mm